Multidimensional coil design (18 distinct pinpoint zones) provides superior detection and location of guns, knives and other flat and rod-shaped weapons regardless of orientation.
Circuitry with advanced Digital Signal Processor (DSP) technology locates even small, hard-to-find, floor level weapons.
Individual zone boost adjustments allow for customization of detection characteristics and/or compensation for metallic environmental challenges.
Durable, IP 65 weather-proof construction.
Can be connected to the PC for the communication .
With REMOTE Control
Optional interface for the CCTV, Monitor

Key features

Specifications:

Operating Temperatures
-4°F (-20°C) to + 158°F (70°C); Humidity: To 95% non-condensing
Power
Fully automatic 100 to 240 VAC, 50 Hertz, 15 watts; no rewiring, switching or adjustments required. Power supply meets UL, CE,FCC standards.
Weatherproofing / Foreign Object Protection Standards
Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
Construction
Attractive scratch and mar-resistant laminate. Detection Heads and Support: Heavy duty aluminum.
Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
Traffic Counter
Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
Synchronization
Dual channels and DSP circuitry allow several PG600M's to operate simultaneously in close proximity to one another.
Interference Suppression
Special DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.
Alarms
Audible tone and volume adjustable. Bright LED visual alarm.
Target Pinpointing Lights
18 distinct zones are displayed with 2 independent columns of LED's located on exit side of PG600M.
Pacing Lights
International symbols
Warranty
Limited 24 months

Technical Parameters
Power Supply	220V/AC
Power	<15W
External Dimension	2200mm(H)820mm(W)550mm(D)
Passageway Dimension	2000mm(H)700mm(W)550mm(D)
Work environment	-20°C- +70°C
Standard	GB15210-2003<WALK THROUGH METAL DETECTOR>

Standard configuration
Main Case	ONE
Left Probe	ONE
Right Probe	ONE
Power Line	ONE
Screws	Eight
Instruction	ONE (Including one Certificate of Quality & Guarantee Repair List)